Please activate JavaScript!
Please install Adobe Flash Player, click here for download
ePaper created 2015-11-12, 17:51:56 | version 1.38.0
I industry news _ Interdent _We have even more to offer Besides the discs already mentioned, Interdent hasseveralotherhigh-qualityandwell-priceddiscs initsrange.Theyareavailableinvariousthicknesses and (some of them) even in different colours. The disc size, with a diameter of 98 mm, is suitable for the widest CAD/CAM milling units. The offering of Interdent discs made of various materials includes the following (Fig. 6): _CC DISK Zr is made of biocompatible pre-sintered zirconia. It is available in two different translu- cencies (ordinary and high translucency) and in different colours. _CC DISK Ti2 is used for the production of crowns and shorter range bridges and single superstruc- tures over implants. _CC DISK Ti5 boasts particular hardness (Vickers hardness of 353) and it is thus used to produce appliances that need to be rigid and tough, such as single crowns, larger bridges, and especially superstructures over implants. _CC DISK PMMA is used for fabricating temporary restorations, for gingival formation after placing implants, and for accurate determination of the occlusal contacts before seating zirconia pros- thetic structures. _CC DISK PMMA Transparent is used for manu- facturing cast and anatomical constructions, for press ceramic and for verifying larger construc- tions thereafter made from zirconia. _CC DISK PMMA Pink is used for fabricating the base for complete prostheses, partial prostheses, and immediately loaded dentures on implants as a long-term provisional solution. _CCDISKPMMAX-RayOpaqueisusedinCAD/CAM millingmachinesformakingX-rayvisibleteethon an implant diagnostic template to view the place- ment of the teeth while planning the position of the implant. _CC DISK WAX is used for making crowns, bridges, and cast bases. Inordertoachievethebestresults,itisimportant to use a specifically designed rotating instrument for each material. Interdent offers these rotating instruments in its CAD/CAM System besides the three milling units, CC POWER, CC COSMO and CC TRENDY (Figs. 7 & 8)._ Figs. 8a–c_Milling units CC POWER (a), CC COSMO (b) and CC TRENDY (c). 42 I CAD/CAM 4_2015 Urša Zagožen is a marketing specialist at Interdent. CAD/CAM_about the author Interdent Opekarniška cesta 26 3000 Celje,Slovenia info@interdent.cc www.interdent.cc CAD/CAM_contact Fig. 8a Fig. 8b Fig. 8c CAD0415_40-42_Interdent 06.11.15 12:03 Seite 3 CAD0415_40-42_Interdent 06.11.1512:03 Seite 3